Multi Lane Depositors

We have produced machines with various lane numbers however this is not a machinery range, each machine can be customised with anywhere between 4 lanes up to around 16 lanes if required.

8 Lane Micro Fill Depositor

Another Micro Fill depositor, this time manufactured for one of our best, local customers. An 8 lane Micro Fill depositor, manufactured to fill 25ml deposits of condiment sauces into heatsealed cups over a ProSeal linear index machine.

This system was supplied to operate from a pneumatic signal supplied from the ProSeal line and to return a fill complete signal once the deposit has been completed, so the conveyor can index on.

This system utilises 8 miniature general purpose nozzles to ensure no dripping between deposits & to guarantee a spill-free seal area around the top of each cup.

This multi-lane type design can be modified from 2 12 deposit outlets with a nozzle pattern to suit your requirements. Please contact us for further details.

6 Lane Micro Fill Depositor

Following on from the successful installation and commissioning of our 9 lane Micro Fill depositor in June 2013, we were tasked by a longstanding customer to build a 6 lane Micro Fill machine to fill 75ml deposits of squash concentrate at 60 fills per minute.

This system was supplied with a sensing and gating system to accept bottles in pucks, arrest in position during filling, and to release for capping processes downstream.

The brief was to fill with an accuracy of +/- 1%, to fill with no frothing of product & to provide a completely dry, spill-free bottle.

The machine was successfully installed and has been in production since December 2013 following a thorough validation process.

This multi-lane type design can be modified from 2 12 deposit outlets with a nozzle pattern to suit your requirements. Please contact us for further details.

Winyard Engineering

2/3 Cresswell Close, Wardentree Lane
Pinchbeck, Spalding
Lincolnshire PE11 3TY
England, United Kingdom
Tel: 01775 725285   Fax: 01775 710620